Scope and limitations#

The trace stops at the camera entrance. The effects below are outside it. Their impact depends on the instrument and its model parameters.

Misalignment of aspheric (dual-mirror) mirrors#

The primary and secondary of the Schwarzschild-Couder telescopes (SST, SCT) are even polynomial surfaces (mirror_class 2) built from segments. In the real telescope each segment, and the secondary as a whole, can be tilted or shifted from the design.

The alignment errors (mirror_align_random_distance, _horizontal, _vertical) and random_focal_length act only on facets of segmented dishes (mirror_class 0). Dual-mirror surfaces are traced at their design position; primary_segmentation and secondary_segmentation define gaps between segments. mirror_reflection_random_angle tilts the surface normal at each reflection (a convention, not a ray angle: see mirror scatter conventions). For the resulting PSF comparisons, see Validation.

Curvature and refraction of the camera window (LST and others)#

A camera window is a transparent plate, flat or curved, in front of the pixels. Refraction in it shifts each photon sideways, moves the focus backwards and delays the photon. A curved window also acts as a weak lens.

The window and its transmission belong to the downstream camera simulation; window geometry and refraction are not traced.

Size of the effects for a flat plate of thickness t and refractive index n (PMMA n = 1.49 as an example; take each camera window’s thickness from the camera documentation):

t

lateral shift at 10 / 16 / 25 deg incidence

focus shift t(1 - 1/n)

extra delay (n_g - 1) t / c

3 mm

0.17 / 0.28 / 0.46 mm

1.0 mm

5 ps

5 mm

0.29 / 0.47 / 0.77 mm

1.6 mm

8 ps

10 mm

0.58 / 0.95 / 1.5 mm

3.3 mm

17 ps

The lateral shift is t sin θ (1 - cos θ / sqrt(n² - sin² θ)); the delay uses a group index n_g ≈ 1.5. The mean incidence angle on the LST focal plane is 16 deg (validation). For comparison: the LST D80 is about 3 cm, its pixels about 5 cm wide, and a focus error δ blurs the image by about δ D / f = δ / 1.2 for the LST. A shell of uniform thickness t and radius of curvature R has optical power of order (n - 1) t / R²: a focal length of kilometres for millimetres and metres, negligible against 28 m.

The focus shift is the only one that is not negligible. It belongs with the camera position: focus_offset (6.55 cm for the LST) was tuned to a measured PSF, so the window is already included. Adding the window to the ray tracing would count it twice unless focus_offset were re-derived at the same time. The origin of each telescope’s focus_offset must be audited before any window refraction is added.

Other effects not traced#

  • Telescope structure of LST, SST and SCT. Only the MST has a telescope_structure table in the models examined. The other telescopes use telescope_transmission, a parametrisation of shadowing.

  • Pixels, light guides, photodetectors: downstream camera simulation.

  • Refraction in air between an illuminator and the telescope: a few arcsec over hundreds of metres.

  • Diffraction and polarisation: irrelevant at the size of IACT mirrors and for unpolarised Cherenkov light.